Home > Shop by Manufacturer > Dry & Store >

Dry-Brik II
Dry-Brik II dessicant briks for dry and store hearing aid dehumidifiers
 
List Price: $9.95
Our Price: $8.95


Product Code: DSDB2
Qty:

Description Additional Information About HearUSA
 
Dry-Brik II Dessicant -- ONLY $8.95!
Three replacement dessicant briks for the Dry and Store Global, and Zephyr hearing aid dehumidifiers.Each brik contains a more aggressive sorbent to absorb damaging moisture, eliminate odor and dry earwax.Each brik features a place to write the date the Dry-Brik is placed in service. The dessicant should be replaced every 2 months.

The Dry-Brik II is a molecular sieve, which is a much more aggressive desiccant than silica gel. It has two important functions: (1) to permanently remove the moisture molecules that are released from the devices during the warming cycle and (2) to drive the relative humidity inside the box to a much lower level than is possible with just a heater, thus maximizing the drying capability.

  • Contains a more aggressive sorbent with much greater moisture-adsorbing capacity
  • Dry-Brik II works with all dry and store models
  • Remove the foil cover to activate the Dry-Brik
  • Once activated, the Dry-Brik should be changed every 2 months for maximum effectiveness
  • Write the date of activation in the area provided on the Dry-Brik as a reminder of when it needs to be replaced
  • The Dry-Brik II is packaged in 3 packs so you can dispense a 6 month supply


Keeping hearing aids clean and dry

The Dry-Brik contained in the Dry & Store family of products has three important functions: (1) to permanently remove the moisture molecules that are released from the devices during the warm drying cycle; (2) to drive the relative humidity inside the box to a much lower level than is possible with just a heater, thus maximizing the drying capability; and (3) to capture odors.

Boxes using heat alone lower the relative humidity by warming the air, but the amount of moisture in the air does not change. While warm air can hold more moisture than cool air, unless the water is removed, it can condense right back where it was when the heat goes off. That's where the desiccant comes in.

Products without a desiccant might work fine in a desert, but in a humid environment they are simply ineffective. The Dry & Store family of products uses Dry-MaxTM technology: a controlled amount of warm dry air, a soft but continuous flow of air around all of the small ports and openings in an electronic device like a hearing instrument, and the powerful Dry-Brik II desiccant to do the job right!